Buy Now, Pay Later Starting at 0% APR learn more
×
8S XMaxx  Brushless
8S XMaxx  Brushless
8S XMaxx  Brushless
8S XMaxx  Brushless
Click to zoom in
  • Guaranteed

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    wheels Tires batteries

  • Wordwide Delivery

    Shipping on all orders

8S XMaxx Brushless

Traxxas
$999.95
$999.95

customers are viewing this product
Velineon VXL-8s Brushless Power System
VXL-8s Waterproof Electronic Speed Control8s LiPo compatible
Built-in cooling fan
Real-time telemetry via Traxxas Link
Machined heat sinks
10-gauge silicone wire
Integrated protection circuits
LED status lights
Velineon 1200XL Brushless Motor“Big Block” brushless motor
4-pole 1275 kV
5mm output shaft
Aluminum slip-on heat sink
Dual motor cooling fans
50+ MPH with Two 4s LiPo Batteries and Included Optional Spur Gear
Traxxas Stability ManagementHelps prevents spinouts and loss of control
Adjusts from off to 100% assistance from the transmitter
TQi2.4GHz High Output Radio SystemTQi 2.4GHz transmitter
Traxxas Link enabled
TQi 2.4GHz 5-channel micro receiver (#6533) with fail-safe security and integrated telemetry ports
Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
Multi-Function knob
Adjustable steering and throttle percentage (dual rates)
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle end points
High 13ms frame rate and near-zero latency for responsive control
Telemetry-ready 5-channel micro receiver with dual channel-1 inputs
BEC Voltage and Motor Temperature Sensor installed
New Body Mount SystemQuick one-hand installation and removal
Uses pivoting rear latch mechanism
Eliminates body posts and clips
DrivetrainFull-time shaft-driven 4-wheel drive
All-metal gears and CVDs
Torque-Biasing Center Drive absorbs shocks and distributes power
24mm splined wheel hexes
Wheel hexes retained with a clip
17mm hex on outside of wheel
Sealed, silicone fluid-filled diffs with large module ring and pinion gears
Splined outdrives attached with external thru-bolt method
Heavy-duty Cush Drive with steel spur gear
Fully machined aluminum stub axles
Splined aluminum center driveshaft
New Motor Mounting SystemPrecision, preset gear mesh adjustments
No manual gear mesh adjustments are required
Motor retention separate from gear mesh
New Modular Composite Chassis
Rigid Chassis StructureModular chassis design interlocks with front and rear bulkheads
Motor mounts to rear bulkhead to eliminate gear crunching flex
Easy to service and access components
Driveline is sealed in the chassis to keep out dirt and grit
New Battery Retention SystemNo body clips or hook and loop straps
Battery hold-downs pivot for easy access
Adjustable for battery size
More secure than conventional retention systems
Integrated into chassis top brace for improved battery tray and chassis stiffness
New Steering Bell Cranks and Servo SaverNew high-output steering servo
Wired directly into the RX box, no external wires seen on chassis
New mounting system to fully support case
Double-shear, bearing supported servo horn
SuspensionEngineered to optimize suspension travel and steering angles
All critical suspension points have double shear strength
High strength steel suspension pins used throughout
Suspension pins retainers won’t come loose or “back-out”
4mm machined pivot balls
C-hub and steering block geometry maximizes steering angle
Adjustable roll center
Fixed, high-strength camber and toe links
Steel upper and lower tie bars
Full contact sealed bearings used in exposed locations
New GTX ShocksMachined aluminum threaded body
Extra-large bore and capacity
5.2mm damper shaft
Lower seal cartridge includes integrated wiper seal combination
Adjustable upper spring retainer
Plastic shock caps with pivot balls
Fixed shock locations
Lower spring perches bolted on
BumpersFront energy absorbing rubber impact bumper
Lower front and rear skids for impact and abrasion resistance
Integrated nerf bars for side impact resistance
Wheels/Tires
  1. 8x4x4 inch all-terrain tires
  2. Large, dual diameter wheels
  3. Specifically formulated 8s rubber compound
  4. 2-piece foam insert
  5. High-strength glue and bead design
Read More
Read Less
Thank you for visiting and shopping at TINY ADVENTURES RC. Following are the terms and conditions that constitute our Shipping Policy. Shipment processing time All orders are processed within 2-3 business days. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. Update this section if your processing time exceeds 2-3 business days. Shipment to P.O. boxes or APO/FPO addresses TINY ADVENTURES RC ships to addresses within the U.S., U.S. Territories, and APO/FPO/DPO addresses. Do not ship to P.O. boxes Shipment confirmation & Order tracking You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours. Customs, Duties and Taxes TINY ADVENTURES RC is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.). TINY ADVENTURES RC is not liable for any products damaged or lost during shipping. If you received your order damaged, please contact the shipment carrier to file a claim. International Shipping Policy Yes we do Ship outside the U.S

Customer Reviews

×

Someone recently bought a

Your cart

×