1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
Click to zoom in
  • Guaranteed

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    wheels Tires batteries

  • Wordwide Delivery

    Shipping on all orders

1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR

Axial
$124.99
  • Includes 3 channel radio system, ESC and transmitter...
$124.99

customers are viewing this product
1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR
  • Includes 3 channel radio system, ESC and transmitter batteries
  • Includes motor and on-board LiPo battery
  • Realistic narrow-stance rock crawler body in olive green or red
  • Molded roll cage with realistic light bar
  • Realistic driver figure and many other scale details
  • Officially licensed KMC XD229 Machete Crawl wheels
  • Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
  • Full-time 4WD
  • Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
  • Steel front and rear axles, front stub axles and dogbones provide strength and durability
  • Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
  • Front and rear axles consist of a two-piece, molded plastic solid axle design
  • 3-Link front and 4-link rear suspension supply optimal handling
  • Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
  • Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
  • Two LEDs in the front bumper for night driving

Overview

The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.

For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!

In The Box
  • (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
  • (1) Axial AE-6 ESC/receiver combo (installed)
  • (1) Dynamite® 88T brushed electric motor (installed)
  • (1) Axial AS-1 steering servo (installed)
  • (1) Axial® AX-4 2.4GHz 3-channel radio
  • (4) AA transmitter batteries
  • (1) 350mAh 2S 7.4V LiPo battery
  • (1) USB LiPo charger
  • (1) Product Manual
 
Needed to Complete
  • Nothing! Everything you need to begin having fun with the 1/24 scale Deadbolt is included!
Read More
Read Less
Thank you for visiting and shopping at TINY ADVENTURES RC. Following are the terms and conditions that constitute our Shipping Policy. Shipment processing time All orders are processed within 2-3 business days. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. Update this section if your processing time exceeds 2-3 business days. Shipment to P.O. boxes or APO/FPO addresses TINY ADVENTURES RC ships to addresses within the U.S., U.S. Territories, and APO/FPO/DPO addresses. Do not ship to P.O. boxes Shipment confirmation & Order tracking You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours. Customs, Duties and Taxes TINY ADVENTURES RC is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.). TINY ADVENTURES RC is not liable for any products damaged or lost during shipping. If you received your order damaged, please contact the shipment carrier to file a claim. International Shipping Policy Yes we do Ship outside the U.S

Customer Reviews

×

Someone recently bought a

Your cart

×